Putting the key in the ignition of a vehicle and starting it is a natural daily act people often take for granted. But when the key will not turn on the ignition or gets broken in the cylinder, suddenly everything stops. Consider the reasons to contact Ignition Repair Central in El Paso TX
Locked Steering Wheel
A locked steering wheel is one of the most common reasons a key will not turn in the ignition. If the steering wheel locks, it is usually an easy fix. Turn the steering wheel from side to side while gently trying to turn the key in the ignition until it turns.
Broken Key
If someone gets frustrated, especially with a locked steering wheel, the key can break in the ignition. This is also something that happens in the cold weather. Contact a professional immediately to fix it as trying to do it yourself can worsen the problem.
Bent Key
It’s all about making a connection when the key turns in the ignition cylinder. If the key is bent, it won’t make the proper connection. Sometimes the key can be bent back into shape, and in other situations, a pro needs to replace it.
Worn Key
Old cars can be reliable, but over time, everything starts to show signs of wear. A key is no exception and might need replacement after years of use. A worn key, much like a bent one, will not make the proper connection to turn on the ignition.
An Obstruction in the Key Cylinder
While a broken key in the cylinder is an obvious problem, other obstructions might go undetected. For example, debris might build up in this area where it is difficult to see what is going on. If they key looks fine but does not go into the cylinder smoothly, it’s time to get a pro to check it out and fix the problem.
Click here to find out more about professional Ignition Repair Central in El Paso TX. When people have ignition problems, help is just a phone call away so everyone can start moving forward with their lives again.
