Business owners are always looking for ways to protect their investments, but they sometimes forget that the buildings they use need maintenance. This is especially true for the roof because it catches most of the rain, sleet, snow, and hail that falls in the area. Commercial Roofing in Burleson TX is usually made using BUR (built-up roofing) techniques. This roofing solution uses multiple layers of roofing felt or a similar membrane placed over the decking. Each layer is coated with asphalt, and the top layer is covered with an aggregate such as gravel. BUR provides an excellent roofing solution that is easy to install and quickly repaired. However, BUR usually requires frequent maintenance.
There are a few alternatives to BUR for Commercial Roofing in Burleson TX. For instance, low-sloped roofs can be covered with TPO (thermoplastic polyolefin) membranes or EPDM (ethylene propylene diene terpolymer). TPO is a polymer that is placed in long sheets. Each seam is chemically welded together while seals around the roofing details are done by hand. TPO provides a durable roof with an excellent service life. The product is fairly easy to repair and major damage can be quickly patched. EPDM is a synthetic rubber. Like TPO, EPDM is placed in long sheets, but the seams require sealants to prevent water from entering the building. EPDM has a decent warranty, but the sealants may require repair before the roof warranty goes out.
Another option for commercial roofing is steel. Steel can be used on almost any roof, but an extremely low-sloped or flat roof may need some adjustment, so it drains correctly. Steel roofing is more commonly used on buildings that have some pitch to the roof. This application generally uses a long, ribbed panel. Steel panels can be secured in various ways. One method uses sheet metal screws with rubber grommets to anchor the panel directly to the decking or frame. This makes a very rigid roof that may not handle high winds very well. The alternative is the standing seam panel. Standing seam panels are anchored with a fastener that is placed beneath the panel. Steel roofing is protected using several methods. The most common are galvanized coatings and baked finishes. Browse our website for more information about commercial roofing.
