Enjoy a Steady Supply of Hot Water Using a Reliable Water Heater in Poulsbo Wa

by | Nov 18, 2016 | Plumbing

Latest Articles

Categories

Archives

A steady supply of heated water is a requirement in any home. Unfortunately, there are no water heating systems available that are trouble free. The one that comes the closest is a solar water heater. However, these hot water systems can be expensive to install, especially if the roof is in poor condition. Of course, the most common kind of Water Heater in Poulsbo Wa is the tank based heating unit. This type of appliance can create hot water by burning a fuel such as natural gas or generating heat with electrical resistance.

Storage water heater systems come in a variety of sizes from small twenty gallon systems that function well in small apartments to 100 hundred gallon models that are often used by businesses. The average size for a residential Water Heater in Poulsbo Wa is forty gallons because this provides an excellent balance between holding capacity and heating capability. Even still, this size of appliance can come in different shapes. For instance, there is a model that uses a short and wide tank and the tall model that can easily fit into tight spaces.

The primary differences between these appliances are due to the way that they heat. For example, the electric unit has one or more electrodes that are inserted into the tank and are controlled by a thermostat. Most models with a thirty gallon or higher capacity use two electrodes for faster heating. Gas burning units have the heating system at the base of the tank and a pipe that runs through the middle that functions as the exhaust. This design presents a problem in areas with hard water because lime and other minerals can collect in the bottom of the tank and reduce the heating ability. Avoiding this problem requires annual flushing of the tank.

One possible option for hot water on tap is the on-demand or inline appliance, sometimes known as the flash water heater. On-demand models work by rapidly heating water in a small reservoir before it is sent to the faucet. The most common footprints for this appliance are small devices that supply heated water for single rooms and those that can provide enough for the whole house.