You don’t want to be stuck with heating repair in Oklahoma City when the mercury hits below freezing. With monthly temperatures averaging at 50 degrees and below throughout winter and spring it is essential to understand the, common problems that are associated with a gas heater or furnace and maintenance tips that can give your furnace a long functional life and keep your home warm and cozy.
Heating Repair In Oklahoma City – Your Gas Furnace Does Not Product Any Or Enough Heat
If your gas furnace is producing no heat, check the thermostat first. Make sure that the thermostat is working well. If the dial is at a low setting, set it slightly higher. If thermostat is functional, check the circuit breaker on the furnace and the pilot light. If the fuse is blown, you will need to replace it and if the pilot light is out, it will have to be reignited.
If your gas furnace is not producing enough heat, the problem could be with the dirty air filter or dirt in the gas burners. You can replace the dirty filter but you will need to call a technician to adjust the gas burners.
If none of these seem to be a problem, schedule an appointment with a service company offering heating repair in Oklahoma City.
Heating Repair In Oklahoma City – Your Gas Furnace Turns On And Off Frequently Or The Furnace Doesn’t Turn Off
Frequent turning on and off indicates a dirty air filter, a problem with the motor or thermostat malfunction. Replace the dirty filter, check the settings in the thermostat and lubricate the motor parts. Check the belt tension in the motor, if it is loose, tighten the belt, if the belt is frayed, you will need to replace it.
On the other hand if the furnace blower doesn’t turn off, check the fan control switch on the furnace and also make sure that thermostat is not set to ‘fan continuous’.
Heating Repair in Oklahoma City – Your Gas Furnace Is Too Noisy
The type of heating repair depends upon the kind of noise that the furnace makes. A high pitch squealing sound could be due to a slipping blower belt. A low pitch rumbling sound when the burners are off could be due to poorly adjusted pilot light. A low pitch rumbling sound when the burners are on may be caused by dirty gas burners.
To repair these problems, you can lubricate the motor parts and tighten the furnace belt and relight the pilot light. To adjust the burners or for further inspection, you need to call a professional technician for heating repair in Oklahoma City.
You need to make sure that the thermostat specs matches with that of the furnace. Thermostats can be digital, mechanical or mercury bimetallic. Talk to a service technician for heating repair in Oklahoma City to choose the right thermostat.
There are few inspections and repairs that can be handled by the home owners. For complex heating repairs Oklahoma City schedule an appointment with professional technicians at Bailey Brothers Heating and Air Conditioning.
Heating Repair
